# ISO 10675 Acceptance levels for radiographic testing of welds

> ISO 10675, Non-destructive testing of welds - Acceptance levels for radiographic testing, specifies acceptance levels for indications in welds examined to ISO 17636; Part 1 covers steel, nickel, titanium and their alloys and Part 2 aluminium and its alloys.

- Source: https://amps.global/glossary/iso-10675/
- Type: Glossary
- Published: 2026-09-05
- Tags: standards

## Key facts

- Acceptance levels 1, 2 and 3 correspond to ISO 5817 quality levels B, C and D
- Applies to radiographs produced to ISO 17636-1 (film) or 17636-2 (digital)
- Limits depend on imperfection type and wall thickness
- The report states the technique standard, the acceptance standard and the level

Also known as: ISO 10675-1, ISO 10675-2, RT acceptance levels.

## In practice

The radiographer interprets the film or digital image, classifies indications by type and size, and compares them with the table for the specified level. Both the ISO 17636 technique reference and the ISO 10675 level appear on the report.

## In AMPS

Because AMPS generates reports from your own Word templates, the code clause, acceptance criteria and revision block stay exactly as your QA system wrote them, with job data filled in automatically.

## Related pages

- [Radiographic testing (RT)](https://amps.global/glossary/radiographic-testing/)
- [ISO 5817](https://amps.global/glossary/iso-5817/)
- [EN ISO 17635 series](https://amps.global/glossary/en-iso-17635-series/)

## Sources

- [ISO - International Organization for Standardization](https://www.iso.org/)